ROEMHELD B1.520 Series Double-acting Stroke End Position Monitoring Block Hydraulic Cylinder
Example Models:
- 1531130KB1.520-16/16
- 1533136BB1.520-25/20
- 1534136BB1.520-32/25
- 1535136BB1.520-40/32
- 1536136BB1.520-50/40
- 1537146BB1.520-63/50
- 1538146BB1.520-80/63
- 1539150LB1.520-100/80
Product Introduction of ROEMHELD Block Hydraulic Cylinder B1.520
Product Overview
Two hydraulic connection variants are available: threaded pipe ports or O-ring sealed manifold mounting, to adapt to different piping layout schemes. Equipped with robust sealing assemblies, it achieves low leakage and reliable long-cycle operation under CNC workshop conditions.
A: Depends on the style of tie-rod. We would like to cast and forge once the quantity above 100 pcs.
A: Well, it depends on the quantity and style of hydrualic cylinders, at least 60 days if we make casting and forging, at least 35 days by maching.
A: Sure, we are the manufacutuer and trading of hydraulic cylinder.
A: Double-Acting-have a port at each end, supplied with hydraulic fluid for both the retraction and extension. Single-Acting-hydraulic fluid enters through
a port at one end of the cylinder, which extends the rod by means of area difference. An external force or gravity returns the piston rod.
A: Sure. Show us the drawing, we will quote for you soonest.
A: Yes, we make and supply a wide rang of hydrualic cylinders as a proffetional manufacture, there are only some kinds of them show on the website. Freely contact us to get more information.
- Operation Type: Double-acting hydraulic drive (hydraulic extend + hydraulic retract)
- Max Rated Operating Pressure: 500 bar
- Standard Piston Bore Sizes: 16 / 25 / 32 / 40 / 50 / 63 / 80 / 100 mm
- Standard Stroke Range: 16 ~ 80 mm
- Mounting Form: Rectangular block housing, fixed via four longitudinal mounting holes
- Hydraulic Connection Options:
- Threaded pipe port version (suffix B)
- O-ring manifold mounting version (suffix K)
- Position Monitoring: Designed for high-pressure resistant proximity sensors (accessory item No.3829030)
- Standard Sealing: NBR (-30 °C ~ +100 °C)
- Optional Sealing: FKM/Viton high-temperature chemical-resistant seals (-20 °C ~ +120 °C)
- Rod End Form: Internal female thread for fitting interchangeable contact bolts
- No built-in stroke end cushioning
- Force Reference @500 bar
Integrated Architecture for Stroke End Position Detection
The cylinder housing reserves dedicated installation positions for high-pressure proximity sensors. Real-time feedback of clamped / unclamped piston positions enables closed-loop control for automated production lines, avoiding collision risks caused by unknown cylinder status.
Bidirectional Hydraulic Actuation
Fully hydraulic extension and retraction eliminates dependence on return springs. It delivers consistent movement speed, precise cycle timing, and can generate both clamping push force and pulling force for complex fixture sequences.
Two Hydraulic Connection Configurations
- Manifold mounting (K-version): Compact concealed installation, neat oil circuit layout for modular fixture blocks.
- Threaded port (B-version): Direct hose connection, convenient for fixture retrofitting and standalone arrangement.
Adjustable Effective Stroke
Optional distance bushings can be installed to shorten the working stroke, offering flexible adaptation for workpieces with varying blank dimensions without modifying the cylinder itself.
Heavy-Duty Steel Housing & Durable Sealing
Solid steel block structure withstands high clamping loads. Optimized sealing system reduces internal leakage, suitable for continuous high-cycle milling, drilling and grinding machining environments.
