Prince Standard Tie‑Rod 3 Inch Versatile General‑purpose Hydraulic Cylinders 3000 PSI
Example Models:
- F300060ABAAA07B
- E300080ABAAA07B
- BF300120ABAAA07B
- F300160ABAAA07B
- E300160ABAAA07B
- F300200ABAAA07B
- F300240ABAAA07B
- F300360ABAAA07B
- F300480ABAAA07B
Prince Standard Tie‑Rod Options Product Introduction
Overview
Prince Standard Tie‑Rod Cylinders are versatile, general‑purpose hydraulic cylinders featuring a classic tie‑rod construction. They are widely used in industrial, agricultural, construction and material‑handling fields, offering flexible mounting options, easy maintenance and reliable performance under standard working conditions. The tie‑rod design allows simple disassembly for inspection, seal replacement and repair.
Key Specifications
- Bore Range: 2 – 8 inch standard bores
- Rated Working Pressure: 2500 PSI / 3000 PSI options available
- Stroke Length: Custom stroke lengths offered per application requirement
- Port Types: SAE, NPT and other standard hydraulic port configurations
- Mounting Configurations: Multiple tie‑rod‑based mounting styles (cross‑tube, clevis, flange, foot mount etc.)
- Surface Finish: Standard black paint; optional corrosion‑resistant coatings
A: Depends on the style of tie-rod. We would like to cast and forge once the quantity above 100 pcs.
A: Well, it depends on the quantity and style of hydrualic cylinders, at least 60 days if we make casting and forging, at least 35 days by maching.
A: Sure, we are the manufacutuer and trading of hydraulic cylinder.
A: Double-Acting-have a port at each end, supplied with hydraulic fluid for both the retraction and extension. Single-Acting-hydraulic fluid enters through
a port at one end of the cylinder, which extends the rod by means of area difference. An external force or gravity returns the piston rod.
A: Sure. Show us the drawing, we will quote for you soonest.
A: Yes, we make and supply a wide rang of hydrualic cylinders as a proffetional manufacture, there are only some kinds of them show on the website. Freely contact us to get more information.
- Barrel: Precision‑honed seamless steel tubing for smooth piston travel and long‑term seal life.
- Piston Rod: Hard‑chrome plated, precision ground and polished to resist wear, abrasion and surface oxidation.
- Tie‑Rods: High‑strength alloy steel tie‑rods secure end caps, providing structural stability under pressure loads.
- End Caps & Piston: Ductile iron or high‑strength steel for heavy‑duty durability.
- Seal Package: Standard polyurethane and fabric‑reinforced seals, with optional heavy‑duty seal sets for dusty, wet or contaminated environments.
- Cross‑Tube Mount: With grease fitting for pivot lubrication, ideal for pivoting‑load applications
- Clevis Mount: Simple pin connection for articulated machinery movements
- Front / Rear Flange Mount: Rigid fixed mounting for stationary industrial equipment
- Foot Mount: Base‑plate style mounting for stable horizontal or vertical installation
- Extended Tie‑Rod Ends: Custom tie‑rod length variations for special mounting requirements
- Custom Rod Diameters: Alternative rod sizes for higher tensile strength or reduced side‑load sensitivity
- Special Port Locations: Optional top, side or bottom porting for space‑limited installations
