Japan Pascal Work support Special model 7MPa Hollow type CST-C CST04-C CST06-C CST010-C CST16-C CST25-C High Performance
Pascal CST‑C is a 7MPa hollow‑type flange‑mount work support developed by Pascal (Japan). It adopts a structure of flange mounting + hollow plunger + hydraulic clamping, specially designed for scenarios requiring shaft/rod penetration, heavy load, high rigidity, and automated precision machining. It solves the supporting and positioning problems of heavy workpieces, deep‑cavity parts, and shaft‑penetrating workpieces.
Main Models: CST04-C CST06-C CST010-C CST16-C CST25-C
Product Introduction of Pascal CST‑C (7MPa Hollow‑Type Flange‑Mount Work Support)
Product Overview
Pascal CST‑C is a 7MPa hollow‑type flange‑mount work support developed by Pascal (Japan). It adopts a structure of flange mounting + hollow plunger + hydraulic clamping, specially designed for scenarios requiring shaft/rod penetration, heavy load, high rigidity, and automated precision machining. It solves the supporting and positioning problems of heavy workpieces, deep‑cavity parts, and shaft‑penetrating workpieces.
A: Depends on the style of tie-rod. We would like to cast and forge once the quantity above 100 pcs.
A: Well, it depends on the quantity and style of hydrualic cylinders, at least 60 days if we make casting and forging, at least 35 days by maching.
A: Sure, we are the manufacutuer and trading of hydraulic cylinder.
A: Double-Acting-have a port at each end, supplied with hydraulic fluid for both the retraction and extension. Single-Acting-hydraulic fluid enters through
a port at one end of the cylinder, which extends the rod by means of area difference. An external force or gravity returns the piston rod.
A: Sure. Show us the drawing, we will quote for you soonest.
A: Yes, we make and supply a wide rang of hydrualic cylinders as a proffetional manufacture, there are only some kinds of them show on the website. Freely contact us to get more information.
- Through‑hole design: Central bore supports shafts, ejector pins, air lines, and coolant lines for special fixtures.
- Flange mounting & high rigidity: Top flange bolt fixing delivers strong rigidity and resistance to eccentric loads for heavy workpieces.
- Heavy‑load support: Support force ranges from 4–20 kN, covering heavy‑duty machining requirements.
- Hydraulic clamping & stable reliability: 7MPa hydraulic clamping with stable pressure holding, no retraction, and resistance to cutting vibration.
- Cutting‑environment resistant: Multi‑layer dustproof and coolant‑proof seals, compatible with chlorine‑based cutting fluids.
- Compact structure: Flange design saves space and fits high‑density tooling layouts.
- Easy maintenance: Seals and plungers are field‑replaceable with low maintenance cost.
- High versatility: Standard 7MPa pressure compatible with most industrial hydraulic systems.
- Shaft/ejector pin fixtures: Workpieces requiring shafts, pins, air tubes, or coolant lines through the center.
- Heavy workpiece machining: Milling, boring, and grinding of large castings, forgings, and thick plates.
- Deep‑cavity part support: Internal support for deep‑cavity and irregular workpieces to improve machining stability.
- Automated production lines: Integrated with robots and conveyors for automatic support and release.
- High‑rigidity applications: Precision machining requiring high support rigidity and resistance to eccentric loads.
- Harsh cutting environments: Conditions with chlorine‑based cutting fluids and heavy iron chip accumulation.
