Authentic Parker 100H Series Heavy-Duty Hydraulic Cylinders 100H-FB63B28-150 100H-FB80B36-250 100H-FB100B45-350 100H-FB125B56-450 for Injection Molding meeting stringent NFPA/ANSI standards
Parker 100H Series Heavy-Duty Hydraulic Cylinders
Product Overview
The Parker 100H Series is a robust, heavy-duty industrial hydraulic cylinder line engineered for the most demanding applications requiring exceptional force, durability, and reliability under extreme pressure, shock loads, and harsh environmental conditions. Built to meet stringent NFPA/ANSI standards, the 100H Series features a rugged tie-rod construction designed to outperform and outlast in high-cycle, high-stress environments.
Example models:
Injection Molding
- 100H-FB63B28-150 (φ63/φ28, 150mm, Rear Flange)
- 100H-FB80B36-250 (φ80/φ36, 250mm)
- 100H-FB100B45-350 (φ100/φ45, 350mm)
- 100H-FB125B56-450 (φ125/φ56, 450mm)
A: Depends on the style of tie-rod. We would like to cast and forge once the quantity above 100 pcs.
A: Well, it depends on the quantity and style of hydrualic cylinders, at least 60 days if we make casting and forging, at least 35 days by maching.
A: Sure, we are the manufacutuer and trading of hydraulic cylinder.
A: Double-Acting-have a port at each end, supplied with hydraulic fluid for both the retraction and extension. Single-Acting-hydraulic fluid enters through
a port at one end of the cylinder, which extends the rod by means of area difference. An external force or gravity returns the piston rod.
A: Sure. Show us the drawing, we will quote for you soonest.
A: Yes, we make and supply a wide rang of hydrualic cylinders as a proffetional manufacture, there are only some kinds of them show on the website. Freely contact us to get more information.
1. Ultra-Rugged Construction
- Cylinder Tube: Precision-honed, cold-drawn steel with a mirror finish to minimize friction and maximize seal life.
- Piston Rod: High-strength, case-hardened carbon steel, deep hard-chrome plated (HRC 54+) for superior wear, corrosion, and impact resistance.
- Tie-Rods: High-tensile, rolled-thread steel rods with heavy-duty nuts for maximum structural integrity under shock loads.
- End Caps: Ductile iron or forged steel construction for exceptional rigidity and impact resistance.
2. Advanced, Leak-Proof Sealing System
- Primary Rod Seal: Parker's proprietary PolyPak or TS-2000 seal – self-compensating, pressure-activated, and low-friction.
- Wiper/Secondary Seal: Dual-lip Wiperseal™ design effectively excludes contaminants (dust, dirt, scale) and prevents oil leakage.
- Piston Seal: Precision-machined, pressure-energized seal for zero internal leakage and consistent efficiency.
- Serviceable Gland: Removable gland design allows in-field seal replacement without full cylinder disassembly.
3. Superior Performance & Control
- Precision Machining: Tight tolerances ensure smooth, low-friction operation, precise positioning, and minimal hysteresis.
- Adjustable Cushions: Standard end-position cushions decelerate loads at stroke extremes, reducing mechanical shock, noise, and equipment wear.
- High-Cycle Capability: Optimized flow paths and robust components support continuous, high-cycle operation in production environments.
4. Versatility & Customization
- Flexible Configurations: Single-rod (standard) or double-rod designs.
- Rod Ends: Multiple standard male/female thread options and custom attachments.
- Optional Features:
- Integrated position sensors (LVDT/Magnetostrictive)
- Proximity/limit switches for position sensing
- Locking valves & load-holding mechanisms
- Oversized ports for high-flow applications
- Gland drain ports, rod bellows, stop tubes, and corrosion-resistant coatings
